Picked
these up off of e-bay for $16.49 w/shipping! It pays to watch
e-bay!
Above:
Tail
light guards out of the box.
Below: The box.
Above: Tail light guards
with the mounting tabs I made and installed. These tabs are held
in place by the same screws that hold the tail lights. Shown
after the spray coating.
Below: Stock tail lights
masked and spray coated. Before spray coating the areas, they
were sanded to help the coating stick.
Above: Trimmed the
stock tail lights with black spray liner from a spray can.
Below: After sanding
and coating the tail light guards with the same black coating
as the taillights. Mounted them with extra brackets to hold them
in place.
I
didn't like the way the brackets turnedout. So I mounted the
Tail Light Guards right to the tail lights with 4 nut and bolts
on each one.
Above: Redid the mounting
with nut and bolts counter sunk holding tail light guards
directly
to to the tail lights.
Below:
Sealed
the nuts to water proof the tail lights
Above: Filled in the
counter sunk bolt holes with JB weld, when hardened, smoothed
and
recoated.
Below: All done!
More
info to come as requested.
|
