Radiator
Over Flow Bottle
Up-dated
photos at the bottom of page.
Found the wasn't happy off the shelve square bottle. After some research I decided to build my own.
Its a simple design, but it works. If out of the way and close the the radiator cap.
Below: Old "off the shelve square bottle".
Below: My home brew bottle.
Below: Plane drawn up while at work.
Below: Parts cut and ready for final assembly.
Below: Glued and drying.
Below: Painted and ready for install.
Below: Installed
Changed how the bottom "T" was installed, replaced the hoses with
thicker hose and installed hose clamps. Replaced the cable ties with
hose clamps.
The bottom "T" now points down rather then out. This gives the hose
from the radiator to the bottle a shorter run and better flow.
 
Modifications
|
|
