Here's the new custom installed BILLET Grill!
Below are the steps of the installation of the top section of the grill.
Sorry no photos of the bottom section were taken.
Below: Old grill with
the door edging pressed on to the stock grill inserts.
Below:
The
stock inserts after being removed
Below:
Grill
with the billet grill insert before customization began.
Below:
Billet
grill from above it cut, trimmed and ready to be inserted into
the chrome stock grill.
Below:
View
of the back with the billet pieces in place.
Below:
Test
fitting front view.
Below:
The
four pieces are in and looking good.
Below:
Inserts
are held in place with sealant.
Below:
Completed
shot
Below:
Completed
shot
Below:
Completed
shot
2/2006
Update
Got
tired of looking at the piss poor job I did when I cut the valance
surports when the lower billet grill was installed. I sanded,
refilled and resanded them, Followed by a coating of black spraycan
of bedliner.
|
|
Also
took off the plastic covers from the rear bumper and recoated
them. Just needed a new coat to clean and chips in them. Also
recoated the taillight guards. The passenger side one took a
swipe from a F-150 and took a chunk out of it. |
|
